An Approach to Faster Than Light Communication Using Quantum Entanglement

Einstein spent the last 30 years of his life trying to perfect a Unified Field Theory. I myself found it extremely difficult to research the material for this article in a timely manner. The subject of time or space-time can be a riddle. As a former engineer I find it a fascinating subject. Faster than light (FTL) or “Superluminal Communication” as it is otherwise called, can be achieved by using Quantum Entanglement. There has been enough research by respected scientists to say that the effect of Quantum Entanglement is instantaneous across all distances. The instantaneous effect happens even across vast stretches of the universe. The above assertion is in agreement with one of the time worn principles of science, Occam’s Razor. The theoretical rule that states explanations should be the simplest, with as few assumptions as possible.

Faster than Light communication is needed because transit times for signals can become increasing long and communication is degraded over very large distances. A radio signal transmission to Mars can take 13 minutes (depending on the position of Mars in relation to earth). One can say hello to a Mars astronaut and will not receive an answer for 26 minutes (signal time to Mars and back). Quantum Entanglement can be described as an event happening in one location can arbitrarily effect an event in another location. This phenomenon has been called “spooky action at a distance”. Quantum entanglement has been observed and studied in relation to subatomic particles such as a photon. The spin (or angular momentum and orientation in its location) of the particle is described as either spin up or spin down. After measuring the spin of a particle the particle maintains its spin. If two entangled particles are measured in the same direction (no matter how far they are apart) their spins must be opposite. Either spin up or spin down. This effect maintains the angular momentum of the universe. It is not difficult to entangle subatomic particles. Entanglement can be achieved by having the particles in proximity to each other for a short time, for example splitting a beam of particles by an external force. This can create two beams of entangled particles such as photons.

I will attempt to explain the workings of a device to communicate using Quantum Entanglement. The concept of the device is to entangle a photon by having it interact with an electron of a material and take on the property of either spin up or spin down. The entangled photon beam will then be spit and sent to a transmitter and receiver. The transmitter and receiver will contain the circulating photons in a waveguide. The transmitter and receiver can then be moved apart for communication purposes. The transmitter will use a magnetic field to change the polarization of the contained photons by “Faraday Rotation”. A Faraday Rotation happens when light passes through a magnetic field in a material. The plane of polarization of the light or photon is rotated. This changing of the polarization will be reflected in the entangled receiver beam. By pulsing the magnetic field off and on a stream of 1’s and 0’s can be transmitted for communication purposes. A detector in the receiver will interpret the 1’s and o’s.

Granted this device is just the beginning, there a many arrangements to use Quantum Entanglement for communication purposes. I hope this article helps to initiate other ideas in this exciting field.

5 Keys to Successful SIP Implementation

Are you an entrepreneur? Then you have to develop yourself technologically to stay in the tough competition and grow bigger. You need systems through which you can reach your customers easily, make deals and increase the sales. SIP trunk is such a system which is build to deliver power of VoIP in order to meet the needs of different departments of your organization. This system is more advanced than old systems like dial-up connections or ISDN. It is also user-friendly.

What is SIP Trunk- Benefits

SIP is the abbreviated form of Session Initiation Protocol. This protocol is installed in an organization so that voice or video calls throughout the business house can be done effectively without any hazards. In this protocol, the telephonic conversations are transformed into data and those are delivered by using private or public IP network. There are lots of advantage of installing these trunking services-

1. Installing SIP protocol is a lot more cost-effective than the other systems. You can save up to 60% and use the money to meet other needs of a business organization.

2. Maintenance of SIP trunks is very easy as it is mainly virtual rather than physical.

3. You can always stay connected to your customers. So, you can expect a healthy professional relationship with them to grow your business.

4. Video calls, video conferencing, instant messaging, etc. all can be done easily by this.

Successful SIP Implementation

Establishing successful communication among the departments of your business house and with the customers is now easy with SIP trunk, but while installing you should remember certain matters-

1. Native SIP-

Ask the provider whether their network can deliver SIP end-to-end and also ask about the size of the local telephone number footprint.

You should check out whether the provider is patching up other networks as those won’t serve your purpose due to poor quality and cause more trouble.

You should also ensure that you are not paying for non-native SIP solution as it requires additional equipment’s and cost you more. Those may not offer as good service as native SIP.

2. Plan for Future-

Don’t fall for anything before knowing the needs of future capacity.

Take your time before installing so that you can get the accurate bandwidth to get quality service.

Talk to your data provider to make sure that the LAN is applications and voice capable.

3. Check out the Features-

Today, SIP trunk comes with wide range of features. You should talk to the provider before paying for it. Not only voice call, but also make sure you get facilities like unified communications, video, messaging, and conferencing and lot more.

4. Breaking Barriers-

Installing SIP trunk will break the ice between the workers of separate departments of your organization. And to make an overall connectivity, you should ask your provider to design it efficiently.

5. Alert the Stakeholders-

While installing a new system you should make your employees aware about the changes. There is no use of installing a newly featured VoIP system if the end-users don’t get the maximum benefit of it.

Questions to Ask Your Communications Infrastructure Provider

Whether you are looking for structured cabling in a new building property or the integration of fibre optic cabling in your business premises, you will need to call on a communications infrastructure solutions provider in order to carry out the work, as these projects require not only the best equipment but also a high level of expertise.

When searching for a communications infrastructure solutions provider, there are several questions that you will need to ask in order to determine whether or not the company is the right match for your needs; here are some of the main things that you will need to check before you agree for them to undertake your project.

Before you begin asking questions however, it is important to bear in mind that your geographical location has a large part to play in how to verify the quality of your service provider. This is because there are certain electrical and cabling standards that are applicable in different parts of the world.

An example of this is, where your provider of structured cabling carry about work that is compliant to a minimum standard of AS/CA S009:2013 as well as abide by national safety legislation. This equally true for any other part of the world where you intend your project to be carried out.

The first question therefore, whether you are looking for structured cabling or fibre optic cabling, is what safety standards does the provider abide by and what safety laws do they respect when carrying out their work. The answer you receive will be informative in a couple of major ways.

If the company that you are thinking of hiring does not hesitate to tell you about the rules and regulations they need to follow, this is a good sign that they are aware of their legal obligations and abide by them. A company technician who does not know this information could, however, be a warning sign that rules are not followed at that particular company.

The next question to ask is whether or not the company has already carried out work on projects like yours before. this is something that is crucial to reassuring you that your project is the in the best hands, as no two data cabling projects are the same and therefore a vast experience is undertaking highly similar work is of great value.

Indeed, many companies will specialise in delivering their work for specific types of client. These might include large and medium size business clients, or instead small to medium residential properties. Some companies might specialise in fibre optic cabling, whereas others who may be dealing with this too could mostly be experts in wireless networks.

In all cases, try to seek out a company that has a vast experience and specialism in your particular project, including the type of project, the scale of the project and the elements that you need designing and installing. If in doubt about the experience of the company, do not hesitate to ask for customer references or case studies to give you proper insight.

The final question that you should ask, whether looking for wireless networks, structured cabling or fibre optic is what kind of after-sales support and warranty is included in your package.

Needless to say, problems can arise after installation, and you will want to know whether or not you are covered in the event of a fault or an emergency breakdown. In some cases a warranty will cover this or a company will provide absolutely free customer support. In other cases, you may have to pay a small fee for help.

All three of these questions are important to ask when choosing a communications infrastructure solutions provider, so make sure that you have clarified this information before going ahead with the project.

Fibrecom Networks is a communications infrastructure solutions integrator specialising in fibre optic and structured cabling projects for medium to large scale environments. We can supply, install, test and commission all your Fibre, Data, CCTV, Audio Visual and Wireless Network cabling requirements. Servicing corporate, commercial, industrial and Government sectors across SE QLD and northern NSW regions, our mission is to provide professional communications solutions with excellent customer service. Fibrecom Networks is a registered “Security Provider” and all materials and labour comes with industry specific warranties as a guarantee of our commitment to providing quality services. To find out more about our services,

Optimum Design For An Audio Visual System Is Rudimentary!

With the advent of multimedia the image and sound requirements have increased multiple folds. The surrounding requires efficient installation of all the necessary essentials that can support the operating mechanism. However, it must be remembered what output should be considered as optimum. This risk may be a bit too high, especially when the reputation of the enterprise can be compromised, if the sound and image quality is not maintained. In devising such systems integration becomes of immense significance. The value that the solution offers to the entire architecture will determine the robustness and efficiency of the support system.

Flexibility is the key to the aforementioned issue resolution. As the capacity of people increase or decrease in any closed environment the frequency and wavelength of the sound must be managed effectively. In the same way the image quality must not decrease if it is made visible to the audience sitting far away. This point to the design considerations and these can have an impact on the overall quality of the sound and image. What to do about it? There is no success rule that can ascertain how it should be managed.

But experts help can add value to the entire procedure. The reason is that experts monitor every detail that may go unnoticed. It is estimated that the global multimedia industry is expected to grow by 56% keeping in view of the escalating demand for technical incorporation of these aspects. The solution must be practical and within the operating range of a particular environment.

When installing the support system on the infrastructure you must be aware of the different aspects of performance and output. In any environment the use of audio and visual support mechanism requires compatibility. This will require incorporation of the specifically designed procedures that can support it. Audio visual system design is a timely reminder to the enterprises to maintain their system in a sustainable manner, so that no disruption can be encountered. The development of the system will be the work of an expert, who can undertake all the functional factors and incorporate it into the infrastructure. Assistance entails developing a framework of resistance against any sort of malfunction. In a particular environment, how would the image and sound provide an optimum level of performance? Do not get restricted by the thought that anybody can do it for you. Look for a reliable vendor as the needs will increase in future.

The overall satisfaction can only enhance through engagement with a dependable service provider as the connectivity between different points must be studied in detail to outline any potential error of varying magnitude. Audio visual system design provides you with an opportunity for you to streamline the sound and image requirements. On the face of it this seems to be a normal job, but its true value will only be construed when you experience a failure and that too in a formal meeting. Without expert support the mechanism will not effectively work as it should. If the image cannot be enlarged for audiences then it will be considered as a malfunction, similarly if notes disruption is encountered in an auditorium environment the output will not be of good quality. You must ensure that these can have severe implications, especially if you are engaged in a meeting with a potential client.

7 Cs of Communication

According to the 7 Cs, communication needs to be:

1. Clear.
2. Concise.
3. Concrete.
4. Correct.
5. Coherent.
6. Complete.
7. Courteous.

In this article, we look at each of the 7 Cs of Communication, and we’ll illustrate each element with both good and bad examples.

1. Clear

When writing or speaking to someone, be clear about your goal or message. What is your purpose in communicating with this person? If you’re not sure, then your audience won’t be sure either.

To be clear, try to minimize the number of ideas in each sentence. Make sure that it’s easy for your reader to understand your meaning. People shouldn’t have to “read between the lines” and make assumptions on their own to understand what you’re trying to say.

Bad Example

Hi John,

I wanted to write you a quick note about Daniel, who’s working in your department. He’s a great asset, and I’d like to talk to you more about him when you have time.

Best,
Skip

What is this email about? Well, we’re not sure. First, if there are multiple Daniels in John’s department, John won’t know who Skip is talking about.

Good Example

Hi John,

I wanted to write you a quick note about Daniel Kedar, who’s working in your department. In recent weeks, he’s helped the IT department through several pressing deadlines on his own time.

We’ve got a tough upgrade project due to run over the next three months, and his knowledge and skills would prove invaluable. Could we please have his help with this work?

I’d appreciate speaking with you about this. When is it best to call you to discuss this further?

Best wishes,
Skip

This second message is much clearer, because the reader has the information he needs to take action.

2. Concise

When you’re concise in your communication, you stick to the point and keep it brief. Your audience doesn’t want to read six sentences when you could communicate your message in three.

• Are there any adjectives or “filler words” that you can delete? You can often eliminate words like “for instance,” “you see,” “definitely,” “kind of,” “literally,” “basically,” or “I mean.”
• Are there any unnecessary sentences?
• Have you repeated the point several times, in different ways?

Bad Example

Hi Matt,

I wanted to touch base with you about the email marketing campaign we kind of sketched out last Thursday. I really think that our target market is definitely going to want to see the company’s philanthropic efforts. I think that could make a big impact, and it would stay in their minds longer than a sales pitch.

For instance, if we talk about the company’s efforts to become sustainable, as well as the charity work we’re doing in local schools, then the people that we want to attract are going to remember our message longer. The impact will just be greater.

What do you think?
Jessica

This email is too long! There’s repetition, and there’s plenty of “filler” taking up space.

Good Example

Watch what happens when we’re concise and take out the filler words:

Hi Matt,

I wanted to quickly discuss the email marketing campaign that we analyzed last Thursday. Our target market will want to know about the company’s philanthropic efforts, especially our goals to become sustainable and help local schools.

This would make a far greater impact, and it would stay in their minds longer than a traditional sales pitch.

What do you think?
Jessica

3. Concrete

When your message is concrete, then your audience has a clear picture of what you’re telling them. There are details (but not too many!) and vivid facts, and there’s laser-like focus. Your message is solid.

Bad Example

Consider this advertising copy:

The Lunchbox Wizard will save you time every day.

A statement like this probably won’t sell many of these products. There’s no passion, no vivid detail, nothing that creates emotion, and nothing that tells people in the audience why they should care. This message isn’t concrete enough to make a difference.

Good Example

How much time do you spend every day packing your kids’ lunches? No more! Just take a complete Lunchbox Wizard from your refrigerator each day to give your kids a healthy lunch and have more time to play or read with them!

This copy is better because there are vivid images. The audience can picture spending quality time with their kids – and what parent could argue with that? And mentioning that the product is stored in the refrigerator explains how the idea is practical. The message has come alive through these details.

4. Correct

When your communication is correct, it fits your audience. And correct communication is also error-free communication.

• Do the technical terms you use fit your audience’s level of education or knowledge?

• Have you checked your writing for grammatical errors? Remember, spell checkers won’t catch everything.

• Are all names and titles spelled correctly?

Bad Example

Hi Daniel,

Thanks so much for meeting me at lunch today! I enjoyed our conservation, and I’m looking forward to moving ahead on our project. I’m sure that the two-weak deadline won’t be an issue.

Thanks again, and I’ll speak to you soon!

Best,
Jack Miller

If you read that example fast, then you might not have caught any errors. But on closer inspection, you’ll find two. Can you see them?

The first error is that the writer accidentally typed conservation instead of conversation. This common error can happen when you’re typing too fast. The other error is using weak instead of week.

Again, spell checkers won’t catch word errors like this, which is why it’s so important to proofread everything!

5. Coherent

When your communication is coherent, it’s logical. All points are connected and relevant to the main topic, and the tone and flow of the text is consistent.

Bad Example

Traci,

I wanted to write you a quick note about the report you finished last week. I gave it to Michelle to proof, and she wanted to make sure you knew about the department meeting we’re having this Friday. We’ll be creating an outline for the new employee handbook.

Thanks,
Michelle

As you can see, this email doesn’t communicate its point very well. Where is Michelle’s feedback on Traci’s report? She started to mention it, but then she changed the topic to Friday’s meeting.

Good Example

Hi Traci,

I wanted to write you a quick note about the report you finished last week. I gave it to Michelle to proof, and she let me know that there are a few changes that you’ll need to make. She’ll email you her detailed comments later this afternoon.

Thanks,
Michelle

Notice that in the good example, Michelle does not mention Friday’s meeting. This is because the meeting reminder should be an entirely separate email. This way, Traci can delete the report feedback email after she makes her changes, but save the email about the meeting as her reminder to attend. Each email has only one main topic.

6. Complete

In a complete message, the audience has everything they need to be informed and, if applicable, take action.

• Does your message include a “call to action,” so that your audience clearly knows what you want them to do?
• Have you included all relevant information – contact names, dates, times, locations, and so on?

Bad Example

Hi everyone,

I just wanted to send you all a reminder about the meeting we’re having tomorrow!

See you then,
Chris

This message is not complete, for obvious reasons. What meeting? When is it? Where? Chris has left his team without the necessary information.

Good Example

Hi everyone,

I just wanted to remind you about tomorrow’s meeting on the new telecommuting policies. The meeting will be at 10:00 a.m. in the second-level conference room. Please let me know if you can’t attend.

See you then,
Chris

7. Courteous

Courteous communication is friendly, open, and honest. There are no hidden insults or passive-aggressive tones. You keep your reader’s viewpoint in mind, and you’re empathetic to their needs.

Bad Example

Jeff,

I wanted to let you know that I don’t appreciate how your team always monopolizes the discussion at our weekly meetings. I have a lot of projects, and I really need time to get my team’s progress discussed as well. So far, thanks to your department, I haven’t been able to do that. Can you make sure they make time for me and my team next week?

Thanks,
Phil

Well, that’s hardly courteous! Messages like this can potentially start office-wide fights. And this email does nothing but create bad feelings, and lower productivity and morale. A little bit of courtesy, even in difficult situations, can go a long way.

Good Example

Hi Jeff,

I wanted to write you a quick note to ask a favor. During our weekly meetings, your team does an excellent job of highlighting their progress. But this uses some of the time available for my team to highlight theirs. I’d really appreciate it if you could give my team a little extra time each week to fully cover their progress reports.

Thanks so much, and please let me know if there’s anything I can do for you!

Best,
Phil

What a difference! This email is courteous and friendly, and it has little chance of spreading bad feelings around the office.

There are a few variations of the 7 Cs of Communication:

• Credible – Does your message improve or highlight your credibility? This is especially important when communicating with an audience that doesn’t know much about you.
• Creative – Does your message communicate creatively? Creative communication helps keep your audience engaged.

Tips To Create A Great Whatsapp Status

Whatsapp is a messenger application that has become very popular not just amongst youngsters but also amongst adults because it makes it easy for people to chat and keep in touch. Perhaps the major reason as to why this mobile platform is loved is because messages can be exchanged across all operating systems and all mobile phones. It is also a platform that uses the normal data plan for email and browsing the internet and therefore does not add any extra costs to chat, share videos and audio messages with friends and family.

Your Whatsapp status is very important because it easily tells your friends what is on your mind or your mood. You can actually use the status to let people know how you are feeling without talking to them. Those in your list of contacts will frequently be checking your status and your profile photo and they therefore can tell exactly what is going on in your life. It is good to have a cool status, but you also should pay attention to what you are posting, however free you are to post anything on your profile.

Be clear and concise – Short but clear messages can be lovely because they are easy for people to understand what your feelings are. Short statuses are loved because they do not take much time of whoever comes across them. Think about what you want to say and find a sentence that can summarize it so you do not end up writing a story.

Keep your readers guessing – Another way of achieving a great status is to keep the status twisted in such a way that readers are not too sure what you could be saying. A status sentence that has a deeper meaning that is not that easy to unveil can keep your friends wondering what you could be talking about or what you are up to. You can be as creative as you want to be when creating such a status to keep the interest and suspense of your circle of friends.

Use inspirational messages – They are great because they actually can work as a motivator to contacts who could be feeling low or sad about an aspect of life. You can choose sayings that have deep meanings or come up with your own creation of a message that is bound to inspire others. You can never know how many situations you can change for others when you select a meaningful status.

Vent but don’t mention any names – Unless you are writing a positive status dedicated to a person you want to appreciate, avoid mentioning names. It is okay to be mad and angry at someone, but quite another when you put it across for everyone else to see. Find a friendly way of venting your anger without compromising the identity of the other person. You should actually think twice about hurling insults at a specific person using your status. It’s good to keep things civil and find ways of settling the situation directly with the person involved.

With the Whatsapp platform now very popular, you can easily find great Whatsapp status [http://whatsapp-status.co.in/] to put on your profile online. You can go through the best statuses listed and possibly add or choose one to put on your status or simply enjoy a good read.

Impedance Matching and Unmatched Impedances

Impedance Matching

Since a transmission line has impedance built in, the natural question to ask is, how does the impedance affect signals that are relayed through a transmission line from one device to another? The answer to this question ultimately depends on the impedance of the devices to which the transmission line is attached. If the impedance of the transmission line is not the same as the impedance of, say, a load connected to it, the signals propagating through the line will only be partially absorbed by the load. The rest of the signal will be reflected back in the direction it came. Reflected signals are generally bad things in electronics. They represent an inefficient power transfer between two electrical devices. How do you get rid of the reflections? You apply a technique called impedance matching. The goal of impedance matching is to make the impedance of two devices that are to be joined equal. The impedance-matching techniques make use of special matching networks that are inserted between the devices.

Unmatched Impedance

A high-impedance transmission line that is connected to a low-impedance load is, analogous to a high-density rope connected to a low-density rope. If you impart a pulse at the left end of the high-density rope (analogous to sending an electrical signal through a line to a load), the pulse will travel along the rope without problems until it reaches the low-density rope (load). At that time, the pulse will induce a longer-wavelength pulse within the low-density rope and will induce a similar wavelength but inverted and diminished pulse that rebounds back toward the left end of the high-density rope. From this analogy, again you can see that only part of the signal energy from the high-density rope is transmitted to the low-density rope.

Techniques for Matching Impedance

This section looks at a few impedance-matching techniques. As a rule of thumb, with most low-frequency applications where the signal’s wavelength is much larger than the cable length, there is no need to match line impedance. Matching impedance is usually reserved for high-frequency applications. Moreover, most electrical equipment, such as oscilloscopes, video equipment, etc., has input and output impedance that match the characteristic impedance of coaxial cables (typically 50 Ω). Other devices, such as television antenna inputs, have characteristic input impedance that match the characteristic impedance of twin-lead cables (300 Ω). In such cases, the impedance matching is already taken care of. A short length of transmission line that is open ended or short-circuit terminated possesses the property of having an impedance that is reactive. By properly choosing a segment of open-circuit or short-circuit line and placing it in shunt with the original transmission line at an appropriate position along the line, standing waves can be eliminated. The short segment of wire is referred to as a stub.

Future Communications of Mankind

Communication could be defined as passing information from one location to the other. We humans are good at communications because we developed a better tool than all other organisms on earth. That tool is language. We created languages. Languages are nothing more than organized signals of messaging. Animals use sound systems but they do not qualify as languages. They might be languages but they are very limited. Our communication skills got better because of the invention on languages.

In contrary to the communications, the information to be passed from location to location is always present. Just because we did not pass the information from one place to the other does not mean that the information is not there. Information and communication are interconnected but are two entirely separate entities. We should treat them separately in order to understand communication and its future.

After developing languages in the early history of humans, we made them organized with grammar. Languages did not have written forms in the beginning. Humans developed written forms of languages to better communicate without using sound. Letters were initially symbols and much more complicated. Unlike today’s letters the early day letters represented whole events or messages. Later on breakdown of such symbols resulted in letters to be used as syllables of sound. It is after the usage of symbols or letters to represent the syllables of sound that the language started to develop drastically.

We also needed to construct languages when we invented computers. We needed to pass the message to the computer and wanted the computer to pass messages to us. There are several computing languages that were created by humans. We do not have access to information that cannot be passed out through language.

For example, people say that they couldn’t explain a feeling with words. You might have heard people saying that words are not enough. It is not just an expression. It is real that our languages are not sufficient to communicate certain information. However, our communication skills and systems have enabled us reach higher achievements.

The future of the communications will need to make sure that all information could be communicated. The future of communications will definitely be influenced by technology. As we have now, there is information communication technology. This will breakdown in the following years into information technology and communication technology. As mentioned above, information and communication are two entirely different entities.

The information technology will focus mainly on gathering, storing and processing information. The communications technology will focus only on communicating. We are already at a point where these two are to be separated. Once these two fields are separated, the future of communications will begin.

After inventing languages, we started using tools to communicate. We still used languages but used tools to apply the language to communicate information. The pen and paper method was prevalent for centuries. Once we had invented electronic media, we had shifted towards the electronic media. The internet was one of the major developments in the communications history of mankind. We now communicate mostly through the internet. All our mobile phones work through a similar system as well.

The early day electronic communications required larger equipment and special locations. Now we have that communication in our pockets. The next step is to bring that communication system inside our physical body. There have been advances made in this direction so that we could one day have the communications system within our body.

Universities and research institutions have carried out experiments where people with disorders have voluntarily participated. The major theme in these experiments was to place a chip in the cortical column of the brain and act as an intermediate communicator between the brain and an assigned computer. The cortical column is a highly sophisticated and outermost layer of the brain where it is believed that our thoughts are processed. Scientists have figured out a way of accumulating the waves produced by our thoughts and translating them into a language that computers could understand. This has made it possible for computers to get commands directly from our brain. The experiments carried out so far had people moving curser pointers on computer screen with their thoughts. It had worked successfully. There have been records of people browsing the internet with their brain. There have been instances of people moving synthetic limbs thorough the same concept.

It is the current state of the future communications technology. This is called the Brain Computer Interface or BCI as abbreviation. BCI is a very advancing stream of science and is proving to be very successful. In BCI the human brain is only communicating with a computer. When this technology would enable people to communicate between people with the aid of computer chips implanted in their brains, then we will reach the future of communications.

There are two major concerns to achieving this state. The first concern is the ethics of placing a chip inside a human brain. There will always be people who support the idea and oppose the idea. If majority of the people didn’t want to do this, then it couldn’t be done. The second concern is to permanently placing such devices inside human brain. The permanent placement of such devices would require energy for them to run, clinical safety and the precision manufacturing. If such a device fails within the brain, replacement would require a surgery. No one will want to open up their skull just to recharge or repair the equipment.

Compared to what is expected in the future communications technology, the current BCI researches are still at their infancies. We will need these devices to be able to translate and then broadcast signals wirelessly. And the signal should be strong enough to be picked up by the signal transmission towers. To achieve this, the device will need much power like our phones. We should either place a battery that should power the device for a life time or should place a mechanism that will keep on charging the device. Placing a battery is not very practical based on our experiences on cell phones. Placing a mechanism is very possible.

Our body generates heat and this heat is transported by our blood stream. If the device could be assigned a mechanism through which the thermal energy could be transformed into electricity, then the power problem will be solved. There are such devices today. There are watches that function on body heat for example.

Producing signals is a concern. The emitted signal might damage the brain cells with radiation. The equipment will get heated with operation. No one would want to bake their brain inside out. We are still decades away from such a technology to exist but that is where we are headed.

Once this technology is in place, we will be able to communicate feelings with people but not by words. When we communicate to someone now, we only try to explain our feelings with words. That is why we say words are not enough. If the chips are capable of receiving our brain waves and communicating the same to another person, then the other person will receive exactly what we had in our mind. If you are sad or happy, the other person on the communication will feel exactly what you feel.

When we say that we are imagining something, we cannot explain our imagination to the fullest to someone. Once this technology is made available, we will be able to share our imaginations with others. We can record and preview our dreams. We can share dreams with others in real time. By the time the technology would reach such a point, we will have self driving vehicles. We will not need to drive. We will not need to press buttons on the car. We can communicate to the car with our mind and the car will take us where we want to go.

It is hard to fully imagine something before it ever existed. The future is not here yet. We can only predict and anticipate it. People can simply predict where the current technologies will take us in the future. If people are to anticipate, they will always want a better system than present. We are going to have a better communications system in the future than we can imagine now.

We all expect something better to happen in our lives. If we think about it cumulatively for humanity, then we need better lives for all. Below are some videos that will explain the advancement of communication technology. These are just the beginning. Later on, we will have even better systems.

Do We Need A Marketing or Advertising Agency, Or Do We Need Both?

It’s a sure bet that the average person on the street isn’t all that sure what the difference is between marketing and advertising. Both are seen as a vehicle to get the word out about your firm or organization or you, which would be quite right. But the two are very different, and if you have a company or organization fortunate enough to have one or both, it is vital that you know what you need most.

Advertising is, at its core, a persuasive message of a product to potential customers. Marketing, on the other hand, is the systematic planning and implementation of activities geared to bring together buyers and sellers for the mutually advantageous exchange of those products.

In many ways, advertising is just one component of marketing. There is public relations, media planning, product pricing etc., as well as things such as distribution, market research and so on. All of these parts, when taken as a whole, represent a comprehensive marketing effort.

Thing is, knowing the difference and doing your own market research is what’s needed to know whether you need one or the other – or both.

It’s a little confusing because most of us know when we need a plumber. The faucet links, the toilet blows up. Call a plumber. When you have a company or organization and whatever product you are selling needs exposure, advertising agencies can help with that. Or is that marketing? What they normally do is advertise your product in traditional media such as TV, radio, magazines and newspapers.

Now what marketing does it take that exposure and figure out a plan to make it part of society’s fabric with a full service effort that continues to communicate the product message even after the radio ad is no longer on the air. That is done by pushing the brand identity, perhaps creating a website, staging events to get the word out, doing direct mail, sending out newsletters and the like. With this comes a wide range of communications tools and tactics that are often customized to your business goals.

With marketing, the goals are:
• Gaining new customers.
• Increasing revenue
• Developing new markets
• Enhancing current customer relationships

All this is done with a customized plan of attack, and all with the idea that brands must be enhanced and a consistent message that clearly communicates the importance of the brand can grow with your business.

Deciding on advertising or marketing – or both – is a decision each business must make. It has a lot to do with your available resources. All in all, it is important that the creative aspects of your business have the look and feel of the image your desire. Usually this is accomplished with a tag team effort between marketing and advertising units.

How To Develop Interpersonal Communication

This particular concept of communication gradually got narrowed down to various categories of which the very common are mass communication, intrapersonal communication and interpersonal communication. These categories became subjects of interest in fields of both communication and psychology and the one that the masses can identify themselves with, is interpersonal communication.

The concept of interpersonal communication is not as difficult as it sounds. It is as simple as having a conversation! Yes! That is what it is. When two people communicate with each other, we call it ‘interpersonal communication’. You call it a conversation, psychology calls it interpersonal communication. That is because psychology views it as not just a conversation, but your way of exchanging ideas, your body language, your ability to maintain eye contact and your grip on the topic. It is not just words that get communicated! Your eyes, your body language and your way of speaking to the other person speak more than mere words.

Well, to simplify, if while talking, you are unable to maintain eye contact and show restlessness then there are chances that you are either lying or hiding something even if you don’t say it out!Words can be deceiving, you see! Technically, it’s a message sending and message receiving process but I would rather go for the simpler version.

The concept might be new but its roots can be traced back to prehistoric times. Even if we were devoid of a civilized society and a script, we did know to communicate!We chose to communicate through sounds and actions, couples had to express after all! Thus, interpersonal communication found itself divided into two. One is the verbal communication and the other is non-verbal. As the name suggests, verbal communication is communication through words injected with sense and grammar. This is where communication became easy. What I find interesting is non-verbal communication. Non-verbal communication came with choices. People used their own way to communicate. Some used the sign language, while some used symbols on paper.

There is another interesting side to interpersonal communication. People show more willingness to talk to a person who is well dressed and impressive. Certain people make their choices based on their background, life instances, character and the like. When you are comfortable with your partner or you share similarities, communication becomes easier and vice versa.

So, next time you step out and have a conversation with someone, you will know there is a lot more to those words that they speak. Happy conversing!